ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-72
STATS LINE Command
STATS ATMSAP Display
The format of the display for the STATS ATMSAP command is:
Sample Time
specifies the time the statistics sample was taken.
Reset Time
specifies the time the statistics counters were last reset.
Frames Sent
specifies the number of frames that were sent.
Frames Rcvd
specifies the number of frames that were received.
Example
This example shows the STATS ATMSAP command:
-> STATS ATMSAP $AM1.#IP
STATS LINE Command
The STATS LINE command displays statistical information for the specified line object.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
LINE line-name
specifies the name of the LINE for which stats is to be displayed.
-> STATS ATMSAP $AM1.#IP
ATM Stats ATMSAP \HANSOLO.$AM1.#IP
Sample Time.............. 10 Feb 1998, 14:00:47.947
Reset Time............... 10 Feb 1998, 13:49:09.195
Frames Sent.............. 3000D Frames Recvd......... 2558D
STATS [/OUT <file-spec>/] LINE line-name [ , RESET ]