ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-73
STATS LINE Command
RESET
specifies the statistical counters are to be reset to their initial values after the
statistics are sampled. This is a sensitive command.
STATS LINE Display
The format of the display for the STATS LINE command is:
Sample Time
is the current date and time.
Reset Time
is the date and time the last reset operation was performed.
No. Times Line Down
indicates the number of times the active line was down.
Cells Received
indicates the number of cells received on the specified line.
Cells Transmitted
indicates the number of cells transmitted on the specified line.
Cells Dropped
indicates the number of cells dropped on the specified line.
Congestion
indicates the amount of congestion that has been experienced on the network.
Free Buffer Underflow
indicates the number of times the error occurs while NEC is receiving the packet.
-> STATS LINE $AM1
ATM Stats LINE \HANSOLO.$AM1
Sample Time.............. 10 Feb 1998, 13:25:06.008
Reset Time............... 10 Feb 1998, 11:31:44.467
No. Times Line Down...... 0D
Cells Received........... 8539504D Cells Transmitted..... 9714226D
Cells Dropped............ 0D Frames Dropped........ 0D
Congestion............... 0D Free Buffer Underflow. 0D
Fifo Overrun............. 0D Max Length Error...... 0D
CRC Error................ 0D User Abort............ 0D
Length Error............. 0D T1 Error.............. 0D
Channel Deactivate....... 544D Raw CRC Error......... 0D