ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-79
STATS SVC Command
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SVC svc-name
specifies the name of the SVC for which statistics are to be displayed.
RESET
specifies the statistical counters are to be reset to their initial values after the
statistics are sampled. This is a sensitive command.
STATS SVC Display
The format of the display for the STATS SVC command is:
Sample Time
specifies the time the statistics sample was taken.
Reset Time
specifies the time the statistics counters were last reset.
Frames Sent
specifies the number of frames that were sent.
Frames Received
specifies the number of frames that were received.
Bytes Sent
specifies the number of bytes that were sent.
Bytes Received
specifies the number of bytes that were received.
STATS [/OUT <file-spec>/] SVC pvc-name [ , RESET ]
-> STATS SVC $AM1.#IP.*
ATM Stats SVC \HANSOLO.$AM1.#IP.SVOO156
Sample Time.............. 12 Feb 1998, 13:37:44.251
Reset Time............... 12 Feb 1998, 13:19:22.922
Frames Sent.............. 4D Frames Received......... 3D
Bytes Sent............... 432D Bytes Received.......... 324D