ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-80
STATUS Command
Example
This example shows the STATS SVC command:
-> STATS SVC $AM1.#IP.SVC00001, RESET
STATUS Command
The STATUS command displays status information for ATM objects.
This is a nonsensitive command.
The STATUS command is supported for the following ATM subsystem objects:
•
ADAPTER
•
ATMSAP
•
LINE
•
PROCESS
•
PVC
•
SUBSYS
•
SVC
For more information enter: HELP subsys cmd object-type
-> HELP ATM STATUS object-type
STATUS ADAPTER Command
The STATUS ADAPTER command displays the current state of the specified adapter.
The state of an ADAPTER object can be either STARTED or STOPPED.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
ADAPTER adapter-name
specifies the name of the ADAPTER for which status is to be returned.
SUB { ALL | NONE | ONLY }
selects the subordinate objects the command affects.
STATUS [/OUT file-spec/ ] ADAPTER adapter-name
[ SUB { ALL | NONE | ONLY } ] [ , DETAIL ]