ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-81
STATUS ADAPTER Command
ALL
specifies that the named object and the subordinate objects are affected.
NONE
specifies that the name object is affected but that the subordinate objects are
not.
ONLY
specifies that only the subordinate objects are affected.
DETAIL
causes the STATUS command to display a list of detailed information about the
adapter. Without this parameter, the command displays only a subset of the
STATUS ADAPTER display.
Default: None.
STATUS ADAPTER Display
The format of the display for the STATUS ADAPTER command is:
The format of the display for the STATUS ADAPTER command with the detail option:
State
specifies the current summary state of the object.
-> STATUS ADAPTER $AM1
ATM Status ADAPTER
Name State Substate Trace Time Loaded
$AM1 STARTED OPERATIONAL OFF 10 Feb 1998,
11:31:44.467
-> STATUS ADAPTER $AM1, DETAIL
ATM Detailed Status ADAPTER \HANSOLO.$AM2
State................... STARTED
Sub State............... OPERATIONAL
Trace................... OFF
Time Downloaded......... 10 Feb 1998, 11:31:44.467
Downloaded By........... $ZAM11
Download Filename....... \HANSOLO.$SYSTEM.SYS01.C7838P00
System Up Time.......... 646357D
Firmware Version........ T8158G01^15Nov96^21Jan97
POST STATUS
Code Running............ BOOT CODE
SNet Id from Init Boot.. %H0000E017F Path from Init Boot......
%H000000000
Interrupt Queue Address. %H0040A2000
Count of Test Failures.. %H00000000 Test No. of 1st Failure..
%H000000000