ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-82
STATUS ADAPTER Command
Sub State
specifies the current sub state or the operation being performed by the ADAPTER.
Values are as follows:
Trace
specifies whether tracing has been enabled.
Trace Filename
specifies the trace file name has been enabled.
Time Downloaded
specifies the time the adapter was downloaded.
Downloaded By
specifies the name of the AMP process which performed the download.
Download Filename
specifies the name of the operation code file used in the download.
Value Description
RESETING The adapter is being reset.
RESET The adapter reset operation completed.
PRIMING The adapted is being placed in boot state.
PRIMED The adapter init boot operation completed.
LOADING The adapter is being downloaded.
LOADED The adapter load operation completed
Q CONFIG The adapter was downloaded, and the queue services
are being initialized.
Q INITIALIZED The adapter queue services operation completed.
DSM CONFIG The DSM objects in the adapter are being configured.
OPERATIONAL The adapter is up and running.
DUMPING The adapter memory is currently being dumped.
DUMP
COMPLETE
The adapter dump operation completed.
FIRMUP The adapter firmware is being updated.
FIRMUP
COMPLETE
The adapter firmware update operation completed.