ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-83
STATUS ADAPTER Command
System Up Time
specifies the time in 1/100th of a second that the adapter software has been
running.
Firmware Version
specifies the name of the version of the firmware or boot code currently running in
the adapter.
POST STATUS:
The post status specifies post status returned by the adapter in response to a Get
Status BootCode command.
Code Running
specifies the code type currently running on the adapter. The possible values
displayed are BOOT CODE, OPERATIONAL CODE, and DIAGNOSTIC CODE.
SNet Id from Init Boot
specifies the ServerNet ID of the CPU that sent the most recent Init Boot BootCode
command.
Path from Init Boot
specifies the ServerNet Path of the CPU that sent the most recent Init Boot
BootCode command.
Interrupt Queue Address
specifies the Interrupt Queue Address of the CPU that sent the most recent Init
Boot BootCode Command.
Count of Test Failures
specifies the number of post test failures
Test No. of 1st Failure
specifies the number of the first POST test that failed.
Example
This example shows the STATUS ADAPTER command:
-> STATUS ADAPTER $AM1, DETAIL