ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-85
STATUS LINE Command
The format of the display for the STATUS ATMSAP command with the DETAIL option
is:
State
specifies the current summary state of the object.
Active PVCs
specifies the number of active PVCs.
Active SVCs
specifies the number of active SVCs.
Example
This example shows the STATUS ATMSAP command:
-> STATUS ATMSAP $AM1.#IP, DETAIL
STATUS LINE Command
The STATUS LINE command displays the dynamic state of the LINE object. The state
of a LINE object can be either STARTED or STOPPED.
This is a nonsensitive command.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
LINE line-name
specifies the name of the LINE for which status is to be returned.
SUB { ALL | NONE | ONLY }
selects the subordinate objects the command affects.
-> STATUS ATMSAP $AM1.#IP, DETAIL
ATM Detailed Status ATMSAP \HANSOLO.$AM1.#IP
State............. STARTED
Active PVCs....... 0
Active SVCs....... 0
STATUS [/OUT file-spec/ ] LINE line-name
[ SUB { ALL | NONE | ONLY } ]