ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-88
STATUS PROCESS Command
The format of the display for the STATUS PROCESS command with the detail option:
State
specifies the current summary state of the object.
Time Last State Change
specifies the time the last state change occurred.
Reason Last State Change
specifies the reason the last state change occurred.
Last Error
specifies the last error detected.
CPU Pin
specifies the CPU and PIN of the process.
Priority
specifies the priority of the process.
Trace
specifies whether tracing is active.
-> STATUS PROCESS $ZAM1, DETAIL
ATM Detailed Status PROCESS \HANSOLO.$ZAM1
State..................... STARTED
Time Last State Change.... 10 Feb 1998, 11:31:36.617
Reason Last State Change.. OPERATOR REQUESTED
Last Error................ 0
CPU Pin................... 1 ,21
Priority.................. 180
Trace..................... OFF
SNet Path/Probe Related
Adapter Probe Status...... ACTIVE
ServerNet Path Status..... ACCESSIBLE
Time Last State Change.... 10 FEB 1998, 11:31:44.605
Reason Last State Change.. OPERATOR REQUESTED
Last Snet Error........... 0
Heap Related
Idle Heap Free Space...... 9196D Idle Heap Used Space..... 29616D
Current Heap Free Space... 33876D Current Heap Used Space.. 35608D
Shared Memory Related
Segment Attach Status..... ATTACHED Module ID............. 810348560D
Mds Allocated............. 4362D Mds Freed............. 4539D
Mds Implicitly Allocated.. 7306D Mds Implicitly Freed.. 7129D