ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-89
STATUS PROCESS Command
SNet Path/Probe Related:
Adapter Probe Status
specifies the status of the probing operation. The values are:
ServerNet Path Status
specifies the status ServerNet path between AMP and the adapter. The values are:
Time Last State Change
specifies the time the last AMP to adapter ServerNet path status changed.
Reason Last State Change
specifies the reason for the last AMP to adapter ServerNet path status change.
Last Snet Error
specifies the last error detected from sending/receiving a probe message.
Heap Related:
Idle Heap Free Space
specifies the free heap space after AMP has initialized.
Idle Heap Used Space
specifies the used heap space after AMP has initialized.
Current Heap Free Space
specifies the current heap free space.
Current Heap Used Space
specifies the current used heap space.
Value Description
ACTIVE The process is sending probe messages to the adapter.
INACTIVE The process is not sending probe messages to the
adapter.
Value Description
ACCESSIBLE The AMP is able to access the adapter through the
ServerNet path to the adapter.
INACCESSIBLE The AMP is not able to access the adapter through the
ServerNet path to the adapter.