ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-91
STATUS PVC Command
STATUS PVC Command
The STATUS PVC command displays the dynamic state of the PVC object. The state
of a PVC object can be either STARTED or STOPPED.
This is a nonsensitive command.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
PVC pvc-name
specifies the name of the PVC for which status is to be returned.
DETAIL
causes the STATUS command to display a list of detailed information about the
specified PVC object. Without this parameter, the command displays only a subset
of the STATUS PVC display.
STATUS PVC Display
The format of the display for the STATUS PVC command is:
The format of the display for the STATUS PVC command with the detail option is:
STATUS [/OUT file-spec/ ] PVC pvc-name [ , DETAIL ]
-> STATUS PVC $AM1.#IP.PVC09
ATM Status PVC $AM1.#IP.PVC09
Name State VPI VCI
$ATM.#IP.PVC01 STARTED 0 110
-> STATUS PVC $AM1.#IP.PVC09, DETAIL
ATM Detailed Status PVC \SYS.$AM2.#IP.PVC09
State..................... STARTED
VPI....................... 0
VCI....................... 110