ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-93
STATUS SUBSYS Command
STATUS SUBSYS Display
The format of the display for the STATUS SUBSYS command is:
The format of the display for the STATUS SUBSYS command with the detail option is:
Primary:
State
specifies the current summary state of the primary ASM process.
Time Last State Change
specifies the time the last summary state of the primary ASM process changed.
Reason Last State Change
specifies the reason for the last summary state change.
-> STATUS SUBSYS $ZZATM
ATM Status SUBSYS
Name State PPID Pri Trace
$ZZATM STARTED 0, 22 180 OFF
$ZZATM-B CREATED 1, 22 180 OFF
-> STATUS SUBSYS $ZZATM, DETAIL
ATM Detailed Status SUBSYS \HANSOLO.$ZZATM
Primary
State..................... STARTED
Time Last State Change.... 03 Feb 1998, 11:23:24.830
Reason Last State Change.. HARDWARE
Last Error................ 0
Cpu Pin................... 0, 17
Priority.................. 180
Trace..................... OFF
Heap Related
Idle Heap Free Space...... 18796D Idle Heap Used Space..... 64112D
Current Heap Free Space... 120468D Current Heap Used Space.. 121472D
Backup
State..................... CREATED
Time Last State Change.... 06 Jun 1998, 13:32:46.377
Reason Last State Change.. HARDWARE
Cpu Pin................... 1, 16
Priority.................. 180
Trace..................... OFF
AMP Related
Name State PPID Pri
$ZAM11 MONITORING 1, 21 180
$ZAM22 MONITORING 2, 7 180
$ZAM13 MONITORING 3, 7 180
$ZAM23 MONITORING 3, 11 180