ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-96
STATUS SVC Command
STATUS SVC Command
The STATUS SVC command displays the dynamic state of the SVC object. The state
of a SVC object can be either STARTED or STOPPED.
This is a nonsensitive command.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SVC svc-name
specifies the name of the SVC for which status is to be returned.
DETAIL
causes the STATUS command to display a list of detailed information about the
specified SVC object. Without this parameter, the command displays only a subset
of the STATUS SVC display.
Considerations
There are no considerations for this command.
STATUS SVC Display
The format of the display for the STATUS SVC command is:
The format of the display for the STATUS SVC command with the detail option:
STATUS [/OUT file-spec/ ] SVC svc-name [ , DETAIL ]
-> STATUS SVC $AM1.#IP.*
ATM Status SVC
Name State VPI VCI
$AM1.#IP.SV00156 STARTED 0 47
-> STATUS SVC $AM1.#IP.*, DETAIL
ATM Detailed Status SVC \HANSOLO.$AM1.#IP.SVC00156
State..................... STARTED
VPI....................... 0
VCI....................... 47
Remote ATM Address........ ISONSAP: 47 00 05 80 FF E1 00 00 00 F2
1A 29 EB 00 00 00 00 01 A2 00H
Local ATM Address......... ISONSAP: 47 00 05 80 FF E1 00 00 00 F2
1A 29 EB 00 00 00 00 01 A3 00H