ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-97
TRACE Command
State
specifies the current summary state of the object.
VPI
specifies the VPI.
VCI
specifies the VCI.
Remote ATM Address
specifies the remote ATM address of the end node.
Local ATM Address
specifies the ATM address of the local node.
Example
This example shows the STATUS SVC command:
-> STATUS SVC $AM1.#IP.*, DETAIL
TRACE Command
The TRACE command initiates trace mode on the specified object. You can use the
TRACE command as a diagnostic tool.
This is a sensitive command.
An SCF trace produces a trace file that can be displayed using the commands
available in the PTrace program. SCP creates the trace file. For more information
about PTrace, see the PTrace Reference Manual .
The TRACE command is supported for the following ATM subsystem objects:
•
ADAPTER
•
PROCESS
•
SUBSYS
For more information enter: HELP subsys cmd object-type
-> HELP ATM TRACE object-type