ATM Configuration and Management Manual

ATM Event Messages
ATM Configuration and Management Manual—522307-003
B-15
602
event
displayed as Adapter-Stopped.
reason
specifies the reason the object became unavailable.
state
in the previous state field, state specifies the state the object was in before
becoming unavailable. In the current state field, state specifies the state of the
object after it became unavailable.
manager name
specifies the ASM.
text
provides additional information about the event.
Cause. An SCF ABORT command was successfully processed or the ATM subsystem
internally aborted the object.
Effect. The ATM subsystem cannot access the object.
Recovery. None. This is an informational event.
602
request
specifies the request being started. The possible values are:
Unknown
Adapter-Download-Request
Adapter-Abort-Request
Adapter-Dump-Request
Adapter-Firmup-Request
Adapter-Run-Post-Request
Adapter-Get-Post-Request
00602 ATM: request Started subject,
Severity: severity [, secondary subject],
Adapter Location: (GRP group, MOD module, SLOT slot),
By AMP In: (CPU cpu, PIN pin)
[, download File: download file name]
[, Download Version: download file version]
[, Firmware File: firmware file]
[, Firmware Version: firmware file version]
[, Dump File: dump file name]