ATM Configuration and Management Manual

ATM Event Messages
ATM Configuration and Management Manual—522307-003
B-17
603
Cause. The AMP received an adapter request which contained a command such as a
START, ABORT, and DUMP.
Effect. The operations required to perform the request has been initiated.
Recovery. None. This is an informational event.
603
request
specifies the request being started. The possible values are:
Unknown
Adapter-Download-Request
Adapter-Abort-Request
Adapter-Dump-Request
Adapter-Firmup-Request
Adapter-Run-Post-Request
Adapter-Get-Post-Request
Adapter-Local-Abort-Request
Adapter-Init-QServ-Request
Adapter-Reset-Request
subject
specifies the subject for the event as Atm-Adapter.
severity
specifies the severity of the event as Informational.
secondary subject
specifies the secondary subject for the event as Amp-Process.
group
specifies the physical group location of the adapter.
00603 ATM: request Complete subject,
Severity: severity [, secondary subject],
Adapter Location: (GRP group, MOD module, SLOT slot),
By AMP In: (CPU cpu, PIN pin)
[, Download File: download file name]
[, Download Version: download file version]
[, Firmware File: firmware file name]
[, Firmware Version: firmware file version]
[, Dump File: dump file name]