ATM Configuration and Management Manual

ATM Event Messages
ATM Configuration and Management Manual—522307-003
B-22
606
slot
specifies the physical slot location of the adapter.
download file name
specifies the download file being used.
download file version
specifies the download file version.
firmware file
specifies the firmware file being used.
firmware file version
specifies the firmware file version.
dump file name
specifies the dump file.
Cause. Specifies that the AMP started an adapter operation or sent a command to the
adapter to initiate an operation.
Effect. A low level command is sent to the adapter’s boot software to perform an
operation.
Recovery. None. This is an informational event.
606
operation
specifies the request being started. The possible values are:
Unknown
Adapter-Reset
Adapter-Run-Post
Adapter-Prime
Adapter-Get-Post
Adapter-Fetch-Version
Adapter-Load-Ram-Op-Code
Adapter-Exec-Op-Code
Adapter-Init-QServ
00606 ATM: operation Complete subject,
Severity: severity [, secondary subject],
Adapter Location: (GRP group, MOD module,
SLOT slot) [, Firmware Version: firmware file version]