ATM Configuration and Management Manual

ATM Event Messages
ATM Configuration and Management Manual—522307-003
B-23
607
Adapter-Dsm-Configure
Adapter-Adapter-Start
Adapter-Adapter-Dump
Adapter-Adapter-Load-Ram-Boot
Adapter-Exec-Boot-Code
subject
specifies the subject for the event as Atm-Adapter.
severity
specifies the severity of the event as Informational.
secondary subject
specifies the secondary subject for the event as Amp-Process.
group
specifies the physical group location of the adapter.
module
specifies the physical module location of the adapter.
slot
specifies the physical slot location of the adapter.
firmware file version
specifies the firmware file version.
Cause. Specifies a low level ADAPTER command was successfully completed.
Effect. The adapter and the AMP software are in a state to proceed to the next
operation.
Recovery. None. This is an informational event.
607
operation
specifies the request being started. The possible values are:
00607 ATM: operation Failed subject,
Severity: severity [, secondary subject],
Adapter Location: (GRP group, MOD module, SLOT slot)
[, Error: error] [, State: state, Event: event,
Action: action] [, Symptom String: symptom string]
[, Reporting Method: reporting method