ATM Configuration and Management Manual

ATM Event Messages
ATM Configuration and Management Manual—522307-003
B-45
1804
error
specifies the ATM subsystem defined error code.
error detail
specifies the detail of the error.
timer name
specifies the timer name.
timer Id
specifies the timer ID.
timer tag
specifies the internal tag value used by the timer.
request Id
specifies the request ID.
symptom string
specifies where the error was detected.
reporting method
specifies where in the software the error was generated.
Cause. Specifies the process encountered an internal error relating to a timer
operation.
Effect. An operation such as sending a message to the adapter cannot proceed
because of the timer error.
Recovery. This error is serious. Contact your service provider.
1804
subject
specifies the subject for the event as Amp-Process.
01804 ATM: Internal Statemachine Error subject,
Severity: severity [, secondary subject], Text: text,
Error: error, Error Detail: error detail [, State: state]
[, state string] [, Event: event] [event string]
[Action: action] [, action string] [, NextState: next state]
[, next state string] [, Symptom String: symptom string]
[, Reporting method: reporting method]