ATM Configuration and Management Manual

ATM Configuration and Management Manual—522307-003
C-1
C Tracing for QIO
TRACE Command
The TRACE command initiates trace mode on the specified object. You can use the
TRACE command as a diagnostic tool.
This is a sensitive command.
An SCF trace produces a trace file that can be displayed using the commands
available in the PTrace program. SCP creates the trace file. For more information on
PTrace, see the PTrace Reference Manual .
The TRACE command is supported for the following ATM subsystem objects:
•
ADAPTER
•
PROCESS
•
SUBSYS
For more information enter: HELP subsys cmd object-type
-> HELP ATM TRACE object-type
TRACE ADAPTER Command
The TRACE ADAPTER command executes a trace on the specified ADAPTER object.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
ADAPTER adapter-name
specifies the adapter on which a trace is to be performed.
TRACE [/OUT file-spec/ ] ADAPTER adapter-name
{ STOP }
{ [, BULKIO | NOBULKIO ]
[ , COUNT count ]
[ , NOCOLL ]
[ , PAGES pages ]
[ , RECSIZE size ]
[ , SELECT select-spec ]
[ , TO file-spec ]
[ , WRAP ] ... }