ATM Configuration and Management Manual

Configuration Quick Start
ATM Configuration and Management Manual—522307-003
1-4
Task 6: Starting the ATMSAP Object
Task 6: Starting the ATMSAP Object
The ATMSAP object must be started to complete your ATM subsystem configuration.
To start the ATMSAP object, use the SCF START ATMSAP command.
Task 7: Adding the Permanent Virtual Circuit
(PVC) Object
The PVC object must be added using the SCF ADD PVC command.
1. To add the PVC object, use the SCF ADD PVC LINE command.
2. To start the PVC object, use the SCF START PVC command.
Note. The LINE and ATMSAP objects are created automatically by the ASM.
->START ATMSAP $AM1.#IP
->ADD PVC $AM1.#IP.PVC01, VPI 1, VCI 100
->START PVC $AM1.#IP.PVC01