ATM Configuration and Management Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series

Configuring the ATM Subsystem

ATM Configuration and Management Manual—522307-003

3-2

Configuration Forms

6. Check that the $ZNET subsystem manager process is started.

$ZNET configures the SCP management process.

7. Check that the QIO subsystem is started.

QIO is preconfigured and started during the system-load sequence as a generic

process. Generic processes are part of the SCF Kernel subsystem ($ZZKRN). For

more information about generic processes, see the

SCF Reference Manual for the

Kernel Subsystem

QIO subsystem configuration is described in the

QIO Configuration and

Management Manual

8. Check that the TSM or OSM processes are running.

For more information, see the TSM or OSM manuals and online help.

Configuration Forms

Before you configure the ATM subsystem, you need to complete a configuration form

for each ATM3SA adapter as described in the

NonStop S-Series Planning and

Configuration Guide

. You need the information on the configuration form for your

configuration. Figure 3-1 on page 3-3 shows a sample completed ATM3SA

Configuration Form.

For each ATM3SA:

•

Enter the name of the system in the System Name field.

•

Enter the group number for this enclosure in the Group Number field.

•

Enter the slot number of this ATM3SA in the Slot Number field. ATM3SAs can be

installed in slots 53 and 54.

•

Because there is one module in a system enclosure, the module number 1, is

already indicated on the form.

•

Complete the ATM port information block for each port on the adapter.

Enter the ATM address to be assigned to the port in the ATM address field.

The address is the one used by the third-party switch connected to this

particular ATM adapter.

Optionally, to save time and effort, you can leave this address blank and allow

the ILMI feature to perform automatic address registration.

Enter the adapter name.

Enter the line name.

Enter the numbers of the processors that will have access to the Access List

field.

•

When you complete this form, enter today’s date in the Date field.