ATM Configuration and Management Manual

Configuring the ATM Subsystem
ATM Configuration and Management Manual—522307-003
3-16
ALTER LINE Command
MAXVCIBITS digit
specifies the address width and the maximum number of VCI bits that can be
active for this interface.
Value: 0 through 16.
Default: 10.
UMECOMMUNITY community-name
specifies the UNI community name for the management entity. The community
name is specified as a text string enclosed in parenthesis. The value specified
must be in the range 0 through 255.
Default: “ ”.
UMEVPI digit
specifies the UME virtual path ID.
Value: 0 through 255.
Default: 1.
UMEVCI digit
specifies the UME virtual circuit ID.
Value: 0 through 3071.
Default: 16.
UNIPORTTYPE {public|private}
specifies the public or private ATM UNI type.
Default: PUBLIC.
UNIVERSION {3.0|3.1}
specifies the UNI version supported by the interface.
Value: 3.0 or 3.1
Default: 3.1.
Example
The following command specifies the ATM address for the line $AM1:
-> ALTER LINE $AM1, &
ATMADDR (isonsap:%h4700dd01272b4a00000000000000000000000100)