ATM Configuration and Management Manual

Configuring the ATM Subsystem

ATM Configuration and Management Manual—522307-003

3-17

START LINE Command

The START LINE command initiates the operation of the LINE object. When the

subsystem has successfully completed processing this command, the LINE object is

placed in the STARTED summary state.

If the ATM address was not previously specified, the address will be created during the

START LINE process.

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

LINE line-name

specifies the LINE name to be placed in the STARTED state.

SUB { ALL | NONE | ONLY }

selects the subordinate objects the command affects.

ALL

specifies that the named object and the subordinate objects are affected.

NONE

specifies that the name object is affected but that the subordinate objects are

not.

Default: None.

ONLY

specifies that only the subordinate objects are affected.

Example

This example starts the line named $ATM:

-> START LINE $AM1

START [/OUT file-spec / ] [ LINE line-name ]

[ SUB { ALL | NONE | ONLY } ]