ATM Configuration and Management Manual

Configuring the ATM Subsystem

ATM Configuration and Management Manual—522307-003

3-18

Step 4: Start the ATMSAP Object

Start the ATMSAP object to complete your ATM ServerNet configuration.

You can issue the SCF START ATMSAP command or start the ATMSAP object by

using the START LINE command with the SUB ALL option. For more information on

using this command, see Section 4, SCF Commands.

START ATMSAP Command

To start the ATMSAP object, use the ATM subsystem SCF START ATMSAP command.

ATMSAP atmsap-name

specifies the ATMSAP name to be started.

Example

The following command starts the ATMSAP object:

-> START ATMSAP $AM1.#IP

Step 5: Create and Start the PVC Object

The PVC object must be created and started using the SCF ADD PVC and START

PVC commands.

Creating and starting a PVC object is optional.

ADD PVC Command

The ADD PVC command creates a PVC object for the ATM subsystem. PVC is

supported only for native operation; LAN emulation is not supported.

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

Note. The LINE and ATMSAP objects are created automatically by the ASM.

START ATMSAP $AM1.#IP

ADD [/OUT file-spec/] [ PVC pvc-name ]

, VPI { 0-255 }

, VCI { 32-3071 }