ATM Configuration and Management Manual

ATM Configuration and Management Manual—522307-003
4-1
4 SCF Commands
This section describes the following topics:
•
An overview of the SCF features and operation, and of the objects on which SCF
operates
•
A general description of the SCF interface to the ATM subsystem
•
The SCF commands supported by the ATM subsystem and the object types
supported for each command
•
Sensitive and nonsensitive commands
•
The following detailed information about each SCF command:
°
A description of the command function
°
The command syntax, including the supported object types and object names
°
The command usage, including prior actions to consider, the effect of the
command completion, and subsequent steps to follow
°
Command examples
Overview
SCF configures, controls, and collects information about data-communications
subsystems for the NonStop server. This section gives an overview of SCF features
and operation and of the objects on which it operates. This section also gives the
general format of SCF commands for the ServerNet ATM subsystem.
SCF provides an operator interface to a process called Subsystem Control Point
(SCP). SCP is an intermediate process between SCF and other data-communications
subsystems for the NonStop server. The ServerNet ATM subsystem is represented as
$ZZATM. This structure appears in Figure 4-1 on page 4-2.