ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-36
ALTER ADAPTER Command
SYSDESC string
specifies the full name and version ID of the system hardware and software,
operating system, and networking components. The string specified must be in the
range 0 through 256. This attribute is for informational purposes only.
Default: blanks.
SYSLOCATION string
specifies the physical location of the device. The string specified must be in the
range 0 through 256. This attribute is for informational purposes only.
Default: blanks.
SYSNAME string
specifies the system name. The string specified must be in the range 0 through
256. This attribute is for informational purposes only.
Default: blanks.
SYSOBJID string
specifies the vendor’s authoritative ID of the Network Management subsystem
contained in the entity. The string specified must be in the range 0 through 256.
This attribute is for informational purposes only.
Default: blanks.
SYSSERVICE digit 1-7
specifies the services offered for this entity. This attribute is for informational
purposes only.
The values are defined as:
1 - Physical (for example, repeaters)
2 - Datalink/Subnetwork (for example, bridges)
3 - Internet (for example, IP routers)
4 - End-to-end (for example, IP hosts)
5 - Undefined
6 - Defined
7 - Applications (for example, mail relays)
The default value is 4.