ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-40
ALTER PVC Command
UNIVERSION {3.0|3.1}
specifies the UNI version supported by the interface. The value specified must be
3.0 or 3.1.
Default: 3.0.
Considerations
The LINE object must be in a STOPPED summary state.
Example
This example shows the ALTER LINE command:
-> ALTER LINE $AM1, UMEVPI 1, UMEVCI 16
ALTER PVC Command
The ALTER PVC command changes the value of one or more attributes of the PVC
object. The PVC object must be in a STOPPED state.
This is a sensitive command.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
PVC pvc-name
specifies the name of the PVC.
VPI digit
specifies the VPI of the PVC. The value specified must be in the range 0 through
255.
Value: 0 through 255.
VCI digit
specifies the virtual circuit identifier (ID) of the PVC. The value specified must be in
the range 32 through 3071.
ALTER [/OUT file-spec/] PVC pvc-name
[ , VPI digit ]
[ , VCI digit ]