ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-41
DELETE Command
Considerations
The PVC must be in a STOPPED summary state.
Example
This example shows the ALTER PVC command:
-> ALTER PVC $AM1.#IP.PVC1, VPI 0, VCI 75
DELETE Command
The DELETE command deletes an object from the ATM subsystem.
This is a sensitive command.
The DELETE command is supported for the following ATM subsystem objects:
•
ADAPTER
•
PVC
Considerations
•
Before you can delete an object the object must be in the STOPPED summary
state.
•
All user added subordinate objects must first be deleted.
•
For more information enter: HELP subsys cmd object-type
-> HELP ATM DELETE object-type
DELETE ADAPTER Command
The DELETE ADAPTER command deletes an adapter and its subordinated objects
from the ATM subsystem. The ADAPTER object must be in a STOPPED state.
This is a sensitive command.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
DELETE [/OUT file-spec/] ADAPTER adapter-name
[, SUB { ALL | NONE | ONLY } ]