ATM Transaction Anayzer User and Installation Guide

Appendix B 152
Appendix B
TLFCONF File Parameters
Parameter Description
KEY License Key
ADMINREC-PROCESS To Process admin transactions. YES|NO
Default: NO
COLL CollectorName ON|OFF to log events.
Default: OFF
PROD- BASENTUM Product base number for event logging.
Default: 0
SSID SSID to use for event logging
Default: TANDEM.270
TRACE PROGRESS or ERROR
ELINK ELKCONF [ProcessName] [Cpu] [Pri]
Default Cpu 0, Priority 160
LOGGER [ProcessName] [Cpu] [Priority]
Default Cpu 0, Priority 160
SAFRDR [ProcessName] [Cpu] [Priority]
Default Cpu 0, Priority 160
DB-SIZE Database size in MBs
Default: 20MB
LOGFILE File for tracing progress/error information
Default: TLFLOG
LOGSIZE Logfile size in BYTES
Default: 1MB
BACKUPCPU Backup Cpus for TLFMAIN backup process.
Default: 0 1 2 3
BIN-LENGTH Number of card prefix digits for the BIN
MAX-RECORDS The maximum number of records to read at one time.
Default: 1000
FREADINTERVAL How often to read TLF files in seconds.
Default: 30 seconds
USER-TOKENS Process User Tokens from the TLF Record YES|NO
Default: NO
FCHECKINTERVAL How often to check for new TLF file in seconds.
Default: 300 sec
HEALTHINTERVAL How often to check the health of the backend components in seconds.
Default: 60 secs
LCONF LconfFileName [ProcessName] [Cpu] [Priority]
Default: Cpu 0, Priority 160
SAF-STAT-INTERVAL How often to check for SAF files in seconds.
Default: Disabled
CARD-INFO Extract card information from the TLF record YES|NO
Default: NO
SBB To enable/disable the sequential block buffering ON|OFF
Default: OFF
CHECK-DATAFLOW-INTERVAL How often to check data flow in seconds
Default: Disabled