ATM Transaction Anayzer User and Installation Guide

Appendix J 180
Parameter Description
execHour The hour (0-24) at which the maintain service should execute.
Default: 0
execMin The min (0-59) at which the maintain service should execute.
Default: 0
batchExecuteWaitTimeMs The amount of time to wait before batch file execution.
Default: 100
WeeklyStatsPurgeIntervalDays Retention period for the weeklystats table
Default: 365
MonthlyStatsPurgeIntervalDays Retention period for the monthlystats table
Default: 730
AdminTransactionsPurgeIntervalDays Retention period for admin transaction tables.
Default: 30
ATMRECOVER Configuration Parameters
Section: Data Source Configuration
Parameter Description
Name Name of the database
User Name Name of the database user
Password Database password
Use Credential Enabled Whether credentials are to be used or not
Section: Operational Parameters
Parameter Description
Nonstop Node Name of the NonStop Node
Default: ””
Fraction Time Logging
Enabled
Enable fraction time logging
Default: 1
Use LocalTime Enabled Enable use of local time
Default: 1
Maximum Log File Length
(Kb)
Log File Length size in Kb.
Default: 4
Log File Name Name of the log file.
Default: ATMRecovery.log
Validation and Repair
Enabled
Enable validation and repair
Default: 1
Log Repaired Transaction
Enabled
Enable logging of repaired transactions
Default: 1
Enable Customer Data Enable/Disable the insertion of data in the Customer Table in the database.
Default: 0
Customer Data File Name Defines the path of the customer data configuration file.
Default: CustomerMapFile.ini
Log Level Log level settings for problem tracing.
Value: 0
Maximum Number of Log
File
Maximum number of log files.
Default: 5
Inbound Recovery File Path Enable the offline recovery process to place all the recovery files at the specified
path. For example,
InboundRecoveryFilePath: C:\HP SST\RECOVERY\REC*.TXT