ATM Transaction Anayzer User and Installation Guide

Appendix J 183
Parameter Description
responsetimedisplayformat The number of digits to be displayed after the decimal in the Response time fields.
For example a value of 5 will display the response time as 0.27777. If the value is
3, the response time will be displayed as 0.277.
Default: 2
MonitorAddress IP address of the machine where Application Server is installed.
MonitorPort The Port on which Web Service Communicates with the ATMMON Service.
QueryTimeFieldIsUTC Checks if the date time related fields stored in the database are in UTC format or
local date time format.
Default: 1
This parameter and ‘Use LocalTime Enabled’ parameter of ATMLOGGER are
interdependent. If ‘Use LocalTime Enabled’ is set to 1, this parameter should be set
to 0 and vice versa.
DispQueryTimeAsUTC Displays the date time in UTC or local date time format.
Default: 0
QueryTables Displays the list of Query tables available on the Query page. The values available
are Transactions, termcashadj, termbalancing, termsetelment.
ConsoleATMStatAdj Configuration Parameters
Section: Data Source Configuration
Parameter Description
Data Source Name of the Database Server
InitialCatalog Name of the database
User Name Name of the database user
Password Database password
Windows Authentication Whether windows authentication mode is to be used or not.
Section: Operational Parameters
Parameter Description
DTFormatString Date format string for display purpose.
Default: “ddd MMM d yyyy HH:mm”
IgnoredTransCodes Message Type to be ignored.
Default: “”
LogFileName Name of the log file.
Default: ConsoleatmStatAdj.log
ReversalTransCodes The Reversal Message Type.
Default: "0420,0412,0430"
AdjAppRespCodes Adjusted approval response codes.
Default: "051,052,055,056,058,059,061,063,064"
NetUnAvailsError Network Unavailable Response Codes
Default: "072,073"
EncryptError Encryption Error Response Codes.
Default: "053"
UnAuthUsage Unauthorized Usage Response Codes.
Default: "050"
ApprovalResponseCodes Response codes for considering a transaction as approval.
Default: 000,001
TimeoutCodes Response codes for the timeout transactions.
Default: “01”
Appendix J