AutoSYNC Software User's Guide (Update 16)

Error Messages
HP AutoSYNC User’s Guide—522580-017
D-5
Informational messages
115
Cause. The monitor process has attempted to start an ASYSYNC process to perform
AutoSYNC synchronization, but the operation failed. The message contains
PROCESS_CREATE_ error and error detail code.
Effect. AutoSYNC processing for the specified user id is not active.
Recovery. Correct the cause of the failure and the process will be restarted
automatically.
120
Cause. The monitor process has started an ASYSYNC process through TCP/IP to
perform AutoSYNC synchronization. The message contains the process name.
Effect. An ASYSYNC process performs the configured synchronizations.
Recovery. Informational message only; no corrective action is needed.
121
Cause. The monitor process has attempted to start a remote destination ASYSYNC
process through TCP/IP to perform AutoSYNC synchronization, but the operation
failed. The message contains PROCESS_CREATE_ error and error detail code.
Effect. AutoSYNC processing for the specified destination system is not active.
Recovery. Correct the cause of the failure and the process will be restarted
automatically.
122
Cause. A file error occurred while synchronizing a file.
Effect. The file is not synchronized and the error is reported in the log. The remaining
files in the fset-ID are synchronized.
Recovery. An EMS message displays the name of the logfile SLggguuu, the key of
the log record, the SYNCfileset ID, the file error and the filename portion of the file. The
user should then refer to the log file for details.
ASYSYNC process failed
ASYSYNC process started via TCP/IP
ASYSYNC TCP/IP remote process creation failure
File Event Occurred