AutoSYNC Software User's Guide (Update 17)

Operations and Management
HP AutoSYNC User’s Guide—522580-018
A-7
SECURITY
LICENSE
requests information about the AutoSYNC license for the current system.
TCPIP
requests information about the configured listener processes.
SECURITY
The SECURITY command instructs the monitor to accept further commands only from
a specific set of process access ids.
The command option is a single character and is a Guardian security specifier. The
command requestor must match the monitor process access ID at the specified
security level.
SWITCH
The SWITCH command causes the monitor primary and backup processes to
exchange roles.
Configuring and Using an Alternate AutoSYNC
Environment
You may configure an alternate AutoSYNC environment for the following reasons:

To configure multiple SYNCusers in different user groups with different privileges
without having to run the monitor process as SUPER.SUPER.

To create testing environments that use different versions of AutoSYNC.
To create an alternate environment, you must configure an alternate monitor and
MapDB, as described below in Configuring an Alternate Monitor Process. You can also
define default global options that apply to this alternate environment by configuring
LOCAL parameters.
If you configure the alternate environment to test or run a different version of
AutoSYNC, you also must install the alternate version of AutoSYNC software in a
separate subvolume as described below in Installing an Alternate Version of
AutoSYNC.
If the environments need to be completely segregated, you may also configure a
separate SysDB and MapDB. The SysDB is version-tolerant; multiple versions of
SECURITY { N | C | U | A | G | O | - }
SWITCH