AutoSYNC Software User's Guide (Update 19)

Command Interpreter
HP AutoSYNC User’s Guide—522580-020
8-6
ACTIVATE SYNCFILESET
* | batchid | batchid - batchid
a collection of file sets by BATCHID or a range of BATCHIDs. Up to 32 ranges can
be entered.
A BATCHID is an integer and is of the same format as an alternate key tag, that is,
two characters in quotes or a number between 1 to 32767.
If batchid-batchid is specified, the second batchid must be greater than the first.
* designates all configured batchids for the user.
To display the file set IDs and BATCHIDs, use INFO BATCHID or INFO
SYNCFILESET.
ACTIVATE SYNCFILESET
Restarts the automatic synchronization of file sets that have been previously
suspended through SUSPEND BATCHID, SUSPEND SYNCFILESET or ADD
SYNCFILESET with the SUSPEND option.
This command can also start the immediate synchronization of one or all scheduled
SYNCfilesets within the configured START and STOP times, even if they have not
previously been suspended.
* | fset-id | fset-id - fset-id
identifies a synchronization file-set ID or a range of file-set IDs. Up to 32 ranges
can be entered.
If fset-id - fset-id is specified, the second fset-id must be greater than the f i rst .
* designates all configured syncfilesets for the user.
ACTIVATE SYNCUSER
Restarts the scheduled synchronizations that had been previously suspended through
the SUSPEND SYNCUSER
command. Note that suspended syncfilesets remain
suspended until they are activated through the ACTIVATE SYNCFILESET
command.
user-ID | ALLUSERS
the Guardian user name or user ID to be activated.
If ALLUSERS is specified, all AutoSYNC users are activated.
ACTIVATE SYNCF[ILESET] fset-range [, fset-range ], ...;
fset-range is { * | fset-id | fset-id - fset-id }
ACTIVATE SYNCU[SER] user-ID | ALLUSERS;