AutoSYNC Software User's Guide (Update 19)
Installation
HP AutoSYNC User’s Guide—522580-020
2-3
Start an EMS Distributor
Then execute the INSTALL macro as follows:.
You may specify a subvolume in which to install the AutoSYNC operational files. In a
network of systems, where application software might be copied from one system to
another, choose a volume and subvolume that can be specified on all systems.
The example below shows the installation to subvolume $UTIL.AUTOSYNC:
Start an EMS Distributor
Before you install the AutoSYNC EMS templates in the system templates, you can
view AutoSYNC messages through an EMS distributor using the AutoSYNC templates
and filter. To do this, enter the following commands in a separate terminal window:
VOLUME $<vol>.ZAUTOSYC
RUN INSTALL
volume $system.zautosyc
$SYSTEM ZAUTOSYC 3> install $util.autosync
HP Nonstop(tm) AutoSYNC(tm) Software File Installer
AutoSYNC software will be installed in subvolume $system.escort
UNPAK - File decompression program - T1255H01 - (2009-09-25)
Archive version: 1
File Mode RESTORE Program - T9074H01 (04FEB2009) (AFN)
(C)2000 Compaq (C)2007 Hewlett-Packard Development Company, L.P.
Drives: (\ATOM.$Z06L)
System: \ATOM Operating System: H06 Tape Version: 3
Backup options: NO AUDITED, BLOCKSIZE 8, NO IGNORE, NO OPEN, PARTONLY OFF,
INDEXES IMPLICIT
*WARNING-7147* Files created and stored via OSS and SQL/MX objects are not
supported.
Restore time: 11Jan2013 15:14 Backup time: 7Jan2013 14:31 Page: 1
Tape: 1 Code EOF Last modif Owner RWEP Type Rec Bl
$UTIL.AUTOSYNC
ASYERROR 286720 7Jan2013 13:37 166,3 NCNC K 128 4
ASYFLTR 101 324 9May2008 9:34 166,3 NCNC
ASYHELP 487424 7Jan2013 13:45 166,3 NCNC K 1928 4
ASYMON 100 6029312 7Jan2013 14:31 166,3 NCNC
ASYSYNC 100 7372800 7Jan2013 14:31 166,3 NCNC
ASYSYNCP 100 7372800 7Jan2013 14:31 166,3 NCNC
AUTOSYNC 100 3568070 7Jan2013 13:46 166,3 NCNC
ZASYDDL 101 114466 7Jan2013 13:38 166,3 NCNC
ZASYTMPL 839 61440 7Jan2013 13:38 166,3 NCNC K 510 4
Summary Information
Files restored = 9 Files not restored = 0
AutoSYNC software file installation is complete.
Proceed to installation instructions described in the user manual.
ADD DEFINE =_EMS_TEMPLATES, CLASS MAP, FILE $UTIL.AUTOSYNC.ZASYTMPL
EMSDIST TYPE P, COLLECTOR $0, TEXTOUT $HOME, FILTER $UTIL.AUTOSYNC.ASYFLTR