5 Access Server Configuration and Management Manual

Configuring the AWAN Access Server

AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001

6-8

Configuring Logging Properties

To configure logging properties, choose Properties... from the Server Characteristics and

Properties menu and then click the Logging index tab. The Logging index tab dialog box

is displayed as shown in Figure 6-6.

Step Action Comments

1. Type an IP address for the public

Get community name in the

corresponding IP Address text

box.

If an IP address is typed in this text box, only a

remote SNMP manager with a corresponding

IP address can issue SNMP GET commands.

If the IP address is set to zero, any RAS

Management Tool user can issue SNMP GET

commands.

2. Type an IP address for the

remoteaccess Set community

name in the corresponding IP

Address text box.

If an IP address is typed in this text box, only a

remote SNMP manager with a corresponding

IP address can issue SNMP SET commands.

If the IP address is set to zero, any RAS

Management Tool user can issue SNMP SET

commands.

3. Type a community name for traps

in the Trap text box.

If a community name and IP address are

assigned for traps, the AWAN access server can

send traps to that remote SNMP manager as

long as the remote computer has the same IP

address. To receive traps, the SNMP manager

must be running.

4. Type an IP address for the Trap

community name in the

corresponding IP Address text

box.

5. Click OK.