AWAN 3883/4/5 Access Server Configuration and Management Manual

Configuring the AWAN Access Server
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
6-11
Creating a Logging Record File
To map a network drive:
1. Select the drive that will be used to connect to the network computer in the Drive
drop-down list box.
2. Select the path of the shared folder you want to connect to in the Path drop-down list
box.
3. Click the Reconnect at logon check box if you want to connect to the shared folder
every time you start Windows.
4. Click OK.
Figure 6-8. Map Network Drive
Note. Do not enable the Reconnect at logon check box if the shared folder will be used
infrequently.