5 Access Server Configuration and Management Manual

Configuring User and Port Access

AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001

7-10

Step 2: Enabling Protocols for a User

To enable protocols for a user, click the Protocols tab. The Protocols tab dialog box is

displayed as shown in Figure 7-5.

Figure 7-5. Add New User Screen—Protocols Tab Dialog Box

Step Action Comments

1. Click the check boxes for the protocols

you want to enable for this user.

Refer to the protocols recorded on your

User Configuration Worksheet for this

user.

For information about how to select

protocols for users, refer to Determining

Which Protocols to Enable for Users on

page 7-2.

2. Click Apply.