AWAN 3883/4/5 Access Server Configuration and Management Manual

Configuring Asynchronous Terminal and Serial
Printer Connections
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
8-21
Configuring Terminal Connections
Step 1: Configuring Modem Properties
Configuring modem properties is explained in Section 12, Configuring Modem
Connections.
Step 2: Configuring Line Properties
To configure line properties, choose Properties... from the Port-Specific Menu for the
port you want to configure and then click the Line tab. Depending on your current
electrical interface for ports, the Line tab dialog box is displayed as shown in Figure 8-3.
(See Note in Step 6.)
Note. You must perform this step only if you are configuring a dial-in connection.