AWAN 3883/4/5 Access Server Configuration and Management Manual

Configuring Asynchronous Terminal and Serial
Printer Connections
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
8-27
Configuring Terminal Connections
6. Choose Dynamic or Local from the
Access drop-down list box.
The Dynamic option allows sessions to
be started from either the Himalaya
NonStop server or from the terminal or
workstation.
The Local option allows sessions to be
started from the terminal or workstation
only.
Note: Do not select the Remote option;
this option is meant for printers using
FASTPTCP.
7. Leave the Default Protocol drop-down
list box at its default setting (Telnet).
8. For the Autoconnect feature, enable the
Autoconnect check box.
For manual login, disable the
Autoconnect check box.
Note: Do not enable the Signal Check
check box.
9. Click OK.
Step Action Comments