5 Access Server Configuration and Management Manual

AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001

10-1

Configuring the 6530 Gateway Feature

This section describes how to configure the 6530 gateway feature for local area network

(LAN)-attached workstation-based VT-series terminal emulators and VT-series

terminals attached to a Transmission Control Protocol/Internet Protocol (TCP/IP)

terminal server. The 6530 gateway feature is supported on the 3883-8R, 3883-16R,

3884R, and 3885R AWAN access server models only.

Sample Configuration

Figure 10-1 shows an AWAN access server in a 6530 gateway configuration. In this

example, a VT100 terminal connected to a TCP/IP terminal server and a LAN-attached

workstation-based VT-series terminal emulator can use Telnet to access a 6530

application on the Tandem NonStop server.

Note. VT-series terminals and workstation-based VT-series terminal emulators can also be

connected asynchronously to the AWAN access server and can access 6530 applications. For

information about this type of configuration, refer to Section 8, Configuring Asynchronous

Terminal and Serial Printer Connections.

Figure 10-1. 6530 Gateway Configuration Example

052CDT .CDD

Himalaya S-Series or

K-Series Server

TCP/IP

Ethernet LAN

AWAN Access Server

Telserv

6530

Application

TN6530

TCP/IP

Terminal Server

VT100

Telnet Client

Workstation

Telnet