5 Access Server Configuration and Management Manual

Configuring the 6530 Gateway Feature

AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001

10-7

Function-Key Mapping

In addition, the EXT key is used with five other alphabetic keys to generate the other ten

6530 function keys. As shown in Figure 10-3, the EXT key is pressed, followed by

either N, P, I, U or D. Table 10-2 shows these additional mappings.

Some VT-series terminals, such as the VT220, have function keys that are recognized

and converted to 6530 functions as shown in Table 10-3

. The mappings shown in the

rightmost column of Table 10-3 are affected when the VT-series terminal function key is

preceded by the EXT key.

If the VT-series terminal does not have a number pad or if a VT100 emulator is being

used on a workstation, the AWAN access server implements a signal window capability

that permits the entry of all 6530 function keys as well as several special functions. The

signal window commands are shown in Table 10-4

Table 10-2. Additional 6530 Key Mappings

Key Unshifted Shifted

. N NEXT PAGE SHIFTED NEXT PAGE

. P PREV PAGE SHIFTED PREV PAGE

. I INS LINE DEL LINE

. U ROLL UP SHIFTED ROLL UP

. D ROLL DOWN SHIFTED ROLL DOWN

.TAB BACK TAB N/A

Table 10-3. VT-Series Terminal Function Key Mappings

VT Key 6530 Function Key (EXT) 6530 Function Key

F6-F16 F6-F16 SF6-SF16

F17-F20 SF1-SF4 N/A

INSERT HERE Insert Character INS LINE

REMOVE Delete Character DEL LINE

FIND ROLL UP SHIFTED ROLL UP

SELECT ROLL DOWN SHIFTED ROLL DOWN

NEXT SCREEN NEXT PAGE SHIFTED NEXT PAGE

PREV SCREEN PREV PAGE SHIFTED PREV PAGE