AWAN 3883/4/5 Access Server Configuration and Management Manual

Configuring Dial-Out Connections
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
11-3
Configuring a Telnet Dial-Out Port on an AWAN
Access Server
Step 2: Configuring Advanced Line Properties
Choose Remote from the Access drop-down list box on the Adv. Line tab dialog box.
Although the other values on the Adv. Line tab are not relevant for dial-out ports, Term
Type ANSI is recommended.
To display the Adv. Line tab dialog box, choose Properties... from the Port-Specific
menu and then click the Adv. Line tab. Figure 11-2
shows the Adv. Line tab dialog box
with the Term Type ANSI and Access Remote selected.
Step 3: Resetting a Port
After you have modified the properties of a port, you must reset the port to implement
the configuration changes in the AWAN access server’s operational database.
To reset a port, choose Reset from the Port-Specific Menu. The Port Reset dialog box is
displayed as shown in Figure 11-3
.
Note. Access Dynamic is not recommended because it might allow stray input from the
modem to prevent remote access to the port.
Figure 11-2. Port Properties Screen—Adv. Line Tab Dialog Box