AWAN 3883/4/5 Access Server Configuration and Management Manual

Configuring Dial-Out Connections
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
11-4
Setting Up a Telnet Service
Click the check box next to the port you want to reset and then click OK. Your changes
may take a few seconds to be implemented.
Setting Up a Telnet Service
The AWAN access server Telnet service enables you to map TCP ports to physical ports
on the AWAN access server. A physical port can have more than one TCP port assigned
to it. Conversely, a TCP port can have more than one physical port assigned to it. This
feature can create a modem pool assigned to a single IP address and TCP port.
To set up a Telnet service for a dial-out port, choose Services... from the Server
Characteristics and Properties Menu and then choose Telnet. The Telnet dialog box is
displayed as shown in Figure 11-4
.
Figure 11-3. Port Reset Dialog Box