AWAN 3883/4/5 Access Server Configuration and Management Manual

Configuring Dial-Out Connections
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
11-5
Setting Up a Telnet Service
Figure 11-4. Telnet Dialog Box
Step Action Comments
1. Type a name for the Telnet service in
the Telnet Name text box.
The Telnet service name is used for
descriptive purposes only. This step is
optional.
2. Choose a TCP port number in the
range 2001 through 2064 from the
TCP Port drop-down list box.
TCP ports 2001 through 2064 are used for
dial-out connections.
Note: Do not use TCP port 23 for dial-out
connections.
3. Choose the port on the modem port
module or the asynchronous port
where the external modem is
connected from the Available list box.
This list box displays the physical ports on
the AWAN access server that can be mapped
to a TCP port.
To set up a modem pool, map multiple
physical ports to a single TCP port.
4. Click the Enable option button to
enable the Telnet service for the port.
5. Click Add>> to make the port active. The port is displayed in the Active window.
6. Click OK.