5 Access Server Configuration and Management Manual

Configuring Security for Remote Access Users

AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001

13-4

Configuring Authentication

To configure RADIUS, SecurID, or XTACACS authentication, choose Properties... from

the Server Characteristics and Properties menu. The Properties screen is displayed with

the General tab active. Click the Security tab to display the Security tab dialog box. The

Security tab dialog box is shown in Figure 13-1

Figure 13-1. Port Properties Screen—Security Tab Dialog Box

Step Action Comments

1. Choose the authentication method

(RADIUS, SecurID, or XTACACS)

from the drop-down list box.

2. Click the Authentication option

button.

3. Type the IP address of the primary

RADIUS, SecurID, or XTACACS

server in the Primary Server text box.

4. Type the IP address of the backup

RADIUS, SecurID, or XTACACS

server in the Backup Server text box.

5. Click More. The Advanced Security Options dialog

box is displayed as shown in Figure 13-2.