AWAN 3883/4/5 Access Server Configuration and Management Manual
About This Manual
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
xx
How This Manual Is Organized
How This Manual Is Organized
This manual consists of 15 sections, 3 appendixes, and a glossary. The Glossary contains
technical terms and abbreviations used throughout the text. Table i summarizes the
contents of this manual.
Table i. Contents (page 1 of 2)
Section or
Appendix Title Contents
1 Introduction to the
AWAN Access Server
Provides an introduction to the AWAN access server
and compares it to the SWAN concentrator.
2 Configuration
Overview
Provides a high-level overview of the tasks you must
perform to configure an AWAN access server. This
section serves as a roadmap to the remaining
sections in this manual.
3 Installing the Software Describes how to install the software provided with
the AWAN access server.
4 Setting Up RAS
Management Tool
Security
Describes how to restrict access to the RAS
Management Tool using the Checkpoint program.
5 Using the RAS
Management Tool
Describes how to use the RAS Management Tool.
6 Configuring the
AWAN Access Server
Describes how to configure your AWAN access
server.
7 Configuring User and
Port Access
Describes how to restrict access to the AWAN access
server by configuring user lists and enabling
protocols for ports.
8 Configuring
Asynchronous
Terminal and Serial
Printer Connections
Describes how to configure asynchronous
connections for Tandem 6530, 6530-compatible, and
VT-series terminals; workstation-based 6530 and
VT-series terminal emulators; and serial printers.
9 Configuring Remote
Access Connections
Describes how to configure the AWAN access server
to provide remote access connections.
10 Configuring the 6530
Gateway Feature
Describes how to configure the 6530 gateway feature
for VT-series terminals attached to a Transmission
Control Protocol/Internet Protocol (TCP/IP) terminal
server and LAN-attached workstation-based VT-
series terminal emulators.
11 Configuring Dial-Out
Connections
Describes how to enable Macintosh, DOS, and
Windows-based computers on the local network to
use internal or external modems on the AWAN
access server.
12 Configuring Modem
Connections
Describes how to configure a modem port module
port or external modem connected to asynchronous
port on an AWAN access server.