AWAN 3883/4/5 Access Server Configuration and Management Manual

Managing the AWAN Access Server
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
14-6
Cloning an AWAN Access Server Configuration
Cloning an AWAN Access Server Configuration
To copy user or port settings from one AWAN access server to another, choose Clone...
from the Control menu on the AWAN access server whose configuration information
you want to copy. The Clone dialog box is displayed as shown in Figure 14-5
.
Figure 14-5. Clone Dialog Box
Step Action Comments
1. Choose the AWAN access server you
want to copy the configuration
information to from the Target drop-
down list box.
2. Click the Users check box if you want
to clone the user database.
Click the Ports check box if you want
to clone the port configurations.
The Users and Ports options will be
disabled on the target AWAN access server
if the corresponding user and port
configuration files do not exist.
If all the ports at the source AWAN access
server are not configured, a message bar is
generated describing the problem.
3. Click OK.