AWAN 3883/4/5 Access Server Configuration and Management Manual

Managing the AWAN Access Server
AWAN 3883/4/5 Access Server Configuration and Management Manual—424242-001
14-7
Cloning a Port Configuration
Cloning a Port Configuration
To copy configuration information from one port to another, choose Clone... from the
Port-Specific menu for the port whose configuration information you want to copy. The
Clone Port dialog box is displayed as shown in Figure 14-6
.
You can use the Clone Port dialog box in two ways:
•
To copy configuration information to a specific port or ports, click the check box
next to the each destination port and then click OK.
•
To copy configuration information to all the ports displayed on the Clone Port dialog
box, click All and then click OK.
Figure 14-6. Clone Port Dialog Box